Fire Detection
Apollo Fire Detectors Limited is one of the world's leading manufacturers of conventional and analogue addressable smoke and heat detectors for commercial and industrial applications. Their detectors hold product approvals worldwide and the company is quality certificated to ISO 9001 by the LPCB. (The Loss Prevention Certification Board).
The Fire Sense Concept panel has been designed to work with the new Fulleon 2 wire sounders, which operate on the detection zone using standard call points and detectors. The panels are available in 2. 4. 6. 8, 12, and 24 zone models with 2 or 4 sounder circuits. They can be used in conventional 4 wire mode, e.g. a pair for detectors and a pair for sounders, for use with existing systems, and also in a 2 wire mode by adding a 2 wire sounder on to the zone. They can be used with a combination of both.
| Concept 12 Zone | Concept 2 Zone |
|
|
The 2 wire system reduces the installation costs dramatically, as cabling consists of just 2 wires and is therefore cheaper. The number of terminations are less and if the sound level is found to be too low on final commissioning, additional sounders can be added easily.
Juno-Net Panels
Fully expandable system - from 1 to 96 loops
125 device addresses per loop
Up to 96 sounders per loop
32 individually programmable sounder addresses per loop
2 Fire output relays (change-over)
Open collector outputs for fire, fault and pre-alarm remote indicators
2 conventional alarm outputs on each Main Panel and Sub-panel
Repeaters with optional integrated Sub-panels
All detector loops monitored for integrity
384 fully programmable zones
512 fully programmable sounder groups
Event log (rolling, 2000 entries)
Multi-Protocol
Compatible with all our own low cost ancillary modules
Backlit LCD display with 4 rows of 40 characters
Programming by infra-red remote keypad, PC keyboard and Windows™ based 'Loader' software Windows™ based PC graphics software for alarm management and reporting
Multiple language support (menu selectable)
BMS output (RS232)
Evacuate/Class Change input
Multi-panel network by RS485 or fibre optic links